Filter
Top Products
110 System Configuration Commands
interface range
Range and Port Channel Range prompts within that mode are displayed in the Link
Aggregation chapter (LAGs) in the SFTOS Command Reference.
Example
Figure 21 Commands Available in Ethernet Range Mode
SFTOS, in contrast to FTOS, does not allow spaces around commas or hyphens in the range
statement. The following example shows an incorrect range statement, followed by the
associated error message.
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#?
addport Add this port to a port-channel.
auto-negotiate Enables/Disables automatic negotiation on a port.
classofservice Configure Class of Service parameters.
cos-queue Configure the Cos Queue Parameters.
deleteport Delete this port from a port-channel.
description Add Description to the interface
dot1x Configure Dot1x interface commands.
exit To exit from the mode.
gmrp Set GARP Multicast Registration Protocol parameters.
gvrp Set GARP VLAN Registration Protocol parameters.
igmp Enable/Disable IGMP Snooping on a selected interface
ip Configure IP parameters.
mac Configure MAC Access List group parameters.
mode Configure the double VLAN tunnel mode for this interface.
mtu Sets the default MTU size.
port Configure a physical port.
port-channel Enable/Disable the port-channel's administrative mode.
port-security Enable/Disable Port MAC Locking/Security for interface.
protocol Configure the Protocol Based VLAN parameters.
service-policy Configure DiffServ Service.
--More-- or (q)uit
set Configure switch options and settings.
shutdown Enable/Disable a port.
snmp Configure SNMP options.
snmp-server Enable/Disable SNMP violation traps interface.
spanning-tree Set the spanning tree operational mode.
speed Sets the speed and duplex setting for the interface.
traffic-shape Configure the maximum transmission bandwidth limit.
vlan Configure VLAN parameters.
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode ?
dvlan-tunnel Configure double VLAN tunneling for a specific port.
dot1q-tunnel Configure double VLAN tunneling for a specific port.
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode dvlan-tunnel ?
<cr> Press Enter to execute the command.
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode dvlan-tunnel
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#vlan ?
acceptframe Configure how to handle tagged/untagged frames
received.
ingressfilter Enable/Disable application of Ingress Filtering Rules.
participation Configure how ports participate in a specific VLAN.
priority Configure the priority for untagged frames.
pvid Configure the VLAN id for a specific port.
tagging Configure tagging for a specific VLAN port.
untagging Configure untagging for a specific VLAN port.