Filter
Top Products
dot1x initialize
SFTOS Command Reference for the S2410, Version 2.4.1.0 171
Syntax
dot1x defaultlogin listname
Mode
Global Config
dot1x initialize
This command begins the initialization sequence on the specified port. This command is only
valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an
error will be returned.
Syntax
dot1x initialize unit/slot/port
Mode
Global Config
Command
History
dot1x login
This command assigns the specified authentication login list to the specified user for 802.1x
port security. The user parameter must be a configured user and the listname parameter must
be a configured authentication login list.
Syntax
dot1x login user listname
Mode
Global Config
dot1x max-req
This command sets the maximum number of times the authenticator state machine on this
port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.
Syntax
dot1x max-req count
The count value must be in the range 1 - 10.
The
no version of this command sets the maximum number of times the authenticator state
machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out
the supplicant.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.