Filter
Top Products
182 Security Commands
radius server key
If the acct keyword is used, the command configures the IP address to use for the RADIUS
accounting server. Only a single accounting server can be configured. If an accounting server
is currently configured, it must be removed from the configuration using the
no form of the
command before this command succeeds. If the optional
port parameter is used, the
command will configure the UDP port to use to connect to the RADIUS accounting server.
The IP address specified must match that of a previously configured accounting server. If a
port is already configured for the accounting server, then the new port will replace the
previously configured value. The port must be a value in the range 1 - 65535, with 1813 being
the default value.
The
no version of this command is used to remove the configured RADIUS authentication
server or the RADIUS accounting server. If the
auth keyword is used, the previously
configured RADIUS authentication server is removed from the configuration. Similarly, if the
acct keyword is used, the previously configured RADIUS accounting server is removed from
the configuration. The
ipaddr parameter must match the IP address of the previously
configured RADIUS authentication / accounting server.
Mode
Global Config
radius server key
Configure the shared secret between the RADIUS client and the RADIUS accounting /
authentication server.
Syntax
radius server key {auth | acct} ipaddr
Depending on whether the auth or acct keyword is used, the shared secret will be configured
for the RADIUS authentication or RADIUS accounting server. The IP address provided must
match a previously configured server. When this command is executed, the secret will be
prompted. The secret must be an alphanumeric value not exceeding 20 characters.
Mode
Global Config
Related
Commands
authentication login Define an authentication login list.
show radius Display RADIUS servers.
users defaultlogin Assign the authentication login list to use for non-configured users when
attempting to log in to the system.