Filter
Top Products
set igmp mrouter
SFTOS Command Reference for the S2410, Version 2.4.1.0 245
set igmp mrouter
Command
History
Related
Commands
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Syntax
show igmpsnooping [unit/slot/port | 1-3965]
Mode
Privileged Exec
Command
History
Report Fields
When no parameter is specified, the response contains the following fields:
Admin Mode—Enabled or Disabled
Interfaces Enabled for IGMP Snooping—This is the list of interfaces on which IGMP Snooping is
enabled.
Multicast Control Frame Count—This displays the number of multicast control frames that are
processed by the CPU.
Vlans enabled for IGMP snooping
When the optional argument unit/slot/port is used, the response is as follows:
IGMP Snooping Admin Mode—This indicates whether or not IGMP Snooping is active on the interface.
Fast Leave Mode—Disable or Enabled
Group Membership Interval—This is the amount of time a switch will wait for a report for a particular
group on a particular interface before it sends a query on that interface. This value may be configured
Version 2.3
Revised to
igmp mrouter.
igmp enable (interface) Enables IGMP Snooping on a selected interface.
igmp mrouter (interface) Configures a selected interface as a multicast router interface.
Parameters
unit/slot/port
OPTIONAL Display ports on which Multicast Routers are detected.
Enter interface in
unit/slot/port format.
1-3965
OPTIONAL Display VLANS for the specified interface on which
Multicast Routers are detected.
Version 2.3
Modified:
1-3965 option added (VLAN ID).