Filter
Top Products
show snmpcommunity
SFTOS Command Reference for the S2410, Version 2.4.1.0 95
show snmpcommunity
This command displays SNMP community information. Six communities are supported. You
can add, change, or delete communities. The switch does not have to be reset for changes to
take effect.
The SNMP agent of the switch complies with SNMP Version 1 (for more about the SNMP
specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to an
external SNMP manager based on the SNMP configuration (the trap receiver and other
SNMP community parameters).
Syntax
show snmpcommunity
Mode
Privileged Exec
show snmptrap
This command displays SNMP trap receivers. Trap messages are sent across a network to an
SNMP Network Manager. These messages alert the manager to events occurring within the
switch or on the network. Six trap receivers are simultaneously supported.
Syntax
show snmptrap
Mode
Privileged Exec
Table 15 Fields of show snmpcommunity Command Output
Field Description
SNMP Community
Name
The community string to which this entry grants access. A valid entry is a
case-sensitive alphanumeric string of up to 16 characters. Each row of this table
must contain a unique community name.
Client IP Address An IP address (or portion thereof) from which this device will accept SNMP
packets with the associated community. The requesting entity's IP address is
ANDed with the Subnet Mask before being compared to the IP Address. Note:
that if the Subnet Mask is set to 0.0.0.0, an IP Address of 0.0.0.0 matches all IP
addresses. The default value is 0.0.0.0.
Client IP Mask A mask to be ANDed with the requesting entity's IP address before comparison
with IP Address. If the result matches with IP Address then the address is an
authenticated IP address. For example, if the IP Address = 9.47.128.0 and the
corresponding Subnet Mask = 255.255.255.0 a range of incoming IP addresses
would match, i.e. the incoming IP Address could equal 9.47.128.0 -
9.47.128.255. The default value is 0.0.0.0.
Access Mode The access level for this community string
Status The status of this community access entry