Filter
Top Products
spanning-tree port mode enable all
SFTOS Command Reference for the S2410, Version 2.4.1.0 273
Syntax
[no] spanning-tree port mode enable
Default
disabled
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
spanning-tree port mode enable all
This command sets the Administrative Switch Port State for all ports to enabled.
The
no version of this command sets the Administrative Switch Port State for all ports to
disabled.
Syntax
[no] spanning-tree port mode enable all
Default
disabled
Mode
Global Config
Command
History
Version 2.3
Modified: Added enable keyword. Added Interface Range and Interface VLAN
modes.
Related
Commands
interface Identifies an interface and enters the Interface Config mode.
interface range Defines an interface range and accesses the Interface Range mode
Version 2.3
Modified: Added
enable keyword.