Filter
Top Products
158 User Account Commands
disconnect
disconnect
This command closes the designated remote session or all sessions.
Syntax
disconnect {sessionID | all}
Mode
Privileged Exec
show loginsession
This command displays current telnet and serial port connections to the switch. It also
displays SSH sessions.
Syntax
show loginsession
Mode
Privileged Exec
ID
Login Session ID
Parameters User Name—The name the user will use to login using the serial port or Telnet. A new user may be
added to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and
is not case sensitive. The Read/Write user ‘admin’ is the only factory default.
Connection From—IP address of the telnet client machine or EIA-232 for the serial port connection.
Idle Time—Time this session has been idle.
Session Time—Total time this session has been connected.
Session Type—Source of connection—serial port, Telnet, etc.
show users
This command displays the configured user names and their settings. This command is only
available for users with Read/Write privileges.
Syntax
show users
Mode
Privileged Exec
Parameters User Name—The name the user will use to login using the serial port, Telnet or Web. A new user may
be added to the switch by entering a name in a blank entry. The user name may be up to eight
characters, and is not case sensitive. The Read/Write user ‘admin’ is the only factory default.