Filter
Top Products
184 Security Commands
radius server timeout
radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted
to the RADIUS server if no response is received. The timeout value is an integer in the range
of 1 to 30.
Syntax
radius server timeout seconds
The no radius server timeout command sets the timeout value to the default value, after
which a request must be retransmitted to the RADIUS server if no response is received.
Default
6
Mode
Global Config
show radius
This command is used to display the various RADIUS configuration items for the switch, as
well as the configured RADIUS servers.
Syntax
show radius [servers]
Mode
Privileged Exec
If the optional keyword
servers is not included, the following RADIUS configuration items
will be displayed:
Primary Server IP Address—Indicates the configured server currently in use for authentication
Number of configured servers—The configured IP address of the authentication server
Max number of retransmits—The configured value of the maximum number of times a request packet is
retransmitted
Timeout Duration—The configured timeout value, in seconds, for request re-transmissions
Accounting Mode—Yes or No
If the optional keyword servers is included, the following information regarding configured
RADIUS servers is displayed.
IP Address—IP Address of the configured RADIUS server
Port—The port in use by this server
Type—Primary or secondary
Secret Configured—Yes / No