168 Security Commands
show port-security static
show port-security static
This command displays the statically locked MAC addresses for port.
Syntax
show port-security static unit/slot/port
Mode
Privileged Exec
The one report field is:
MAC Address—MAC Address of statically locked MAC
show port-security violation
This command displays the source MAC address of the last packet that was discarded on a
locked port.
Syntax
show port-security violation unit/slot/port
Mode
Privileged Exec
The one report field is:
MAC Address—MAC Address of discarded packet on locked port
Port-Based Network Access Control (IEEE 802.1X)
This section contains the following commands:
• authentication login on page 169
• clear dot1x statistics on page 170
• clear radius statistics on page 170
• dot1x defaultlogin on page 170
• dot1x initialize on page 171
• dot1x login on page 171
• dot1x max-req on page 171
• dot1x port-control on page 172
• dot1x port-control all on page 172
• dot1x re-authenticate on page 173
• dot1x re-authentication on page 173
• dot1x system-auth-control on page 174