Filter
Top Products
224 VLAN-Stack Commands
show dvlan-tunnel
show dvlan-tunnel
This command displays whether an interface is enabled for Double VLAN Tunneling, along
with the system-configured etherType and detailed information about Double VLAN
Tunneling for the specified interface, or a list of interfaces and their tunneling status. This
command performs the same function as
show dot1q-tunnel.
Syntax
show dvlan-tunnel [interface {unit/slot/port | all}]
Mode
Privileged Exec and User Exec
Web User
Interface
Double VLAN Tunneling Summary (This S50 Web Interface panel has similar functionality.
Access it in the node tree through System >> Port >> Double VLAN Tunneling.)
Related
Commands
dvlan-tunnel ethertype Configures the etherType for all vlan-stack (Double VLAN tagging)
interfaces on the system.
mode dot1q-tunnel Enable Double VLAN Tunneling on the specified interface.
mode dvlan-tunnel same as above
Parameters
interface {unit/slot/
port
| all}]
Enter the interface keyword followed by either a specific address in
the form of
unit/slot/port or enter the word all.
Unit/Slot/Port—Valid unit, slot and port number separated by forward
slashes.
Related
Commands
dvlan-tunnel ethertype Configures the etherType for all vlan-stack (Double VLAN tagging)
interfaces on the system.
mode dot1q-tunnel Enable Double VLAN Tunneling on the specified interface.
mode dvlan-tunnel same as above