Filter
Top Products
256 LAG/Port Channel Commands
show port-channel
Syntax
show port-channel brief
Mode
Privileged Exec and User Exec
Example
Figure 51 Example of show port-channel brief Command Output
Static Capability—This field displays whether or not the device has static capability enabled.
For each LAG, the following information is displayed:
Logical Interface—The field displays the logical ID of the LAG.
Port-Channel Name—This field displays the user-assigned name of the LAG.
Link State—This field indicates whether the link is up or down.
Mbr Ports—This field lists the ports that are members of this LAG, in slot/port notation.
Active Ports—This field lists the ports that are actively participating in this LAG.
The example in Figure 51 shows two LAGs, with system-assigned IDs of 1/1 and 1/2.
show port-channel
This command displays an overview of all port channels (LAGs) on the switch.
Syntax
show port-channel {LAG_ID | all}
Mode
Privileged Exec
LAG_ID—Valid unit, slot and port number separated by forward slashes.
Lag Name—The name of this port channel (LAG). You may enter any string of up to 15 alphanumeric
characters.
Link State—Indicates whether the Link is up or down.
Force10 S2410 #show port-channel brief
Static Capability: Disabled
Logical Interface Port-Channel Name Link State Mbr Ports Active Ports
----------------- ----------------- ---------- --------- ------------
1/1 lag1 Up 0/16, 0/16,0/17,
0/17, 0/18,0/19,
0/18, 0/20,0/21,
0/19, 0/22,0/23,
0/20, 0/8,0/9,0/5,
0/21, 0/12
0/22,
0/23,0/8,
0/9,0/5,
0/12
1/2 lag2 Up 0/10,0/11 0/10,0/11