Filter
Top Products
show network
SFTOS Command Reference for the S2410, Version 2.4.1.0 81
show network
Command
History
Related
Commands
show running-config
This command is used to display/capture the current setting of different protocol packages
supported on the switch. This command displays/captures only commands with settings/
configurations with values that differ from the default value. The output is displayed in script
format, which can be used to configure another switch with the same configuration.
When a script name is provided, the output is redirected to a configuration script. The option
[
all] will also enable the display/capture of all commands with settings/configurations that
include values that are the same as the default values. If the optional <
scriptname> is
provided with a file name extension of “.scr”, the output will be redirected to a script file.
Syntax
show running-config [all] [scriptname]
Mode
Privileged Exec
If static capability is enabled—
port-channel staticcapability—the device has static capability
enabled.
Version 2.3
Deprecated: The keyword
managementethernet in the command show
interface
provides the information that had been available through this command.
show interface
managementethernet
Displays information about the management address of the switch.