Filter
Top Products
show interface ethernet
SFTOS Command Reference for the S2410, Version 2.4.1.0 67
Related
Commands
show interface ethernet
This command displays detailed statistics for a specific port or for all CPU traffic based upon
the argument.
Syntax
show interface ethernet {switchport | unit/slot/port | 1-3965}
Parameters
Mode
Privileged Exec
Usage
Information
This command displays distinctly different reports, depending on the entered parameter.
Figure 10 on page 68 shows an example of the
show interface ethernet report when the
keyword
switchport is added. Table 7 on page 68 contains an explanation of the report
fields.
Figure 11 shows an example of the
show interface ethernet report when the argument is
unit/slot/port. Table 8 contains an explanation of the report fields.
ip address (management) Configures the IP address of the management interface.
show interface ethernet Displays detailed statistics for a specific port or for all CPU traffic
based upon the argument.
show interface switchport Displays a summary of statistics on Layer 2 interfaces.
show interface
managementethernet
Displays information about the management interface to the switch.
switchport
The display parameters for when switchport is entered, are shown
below the list for
unit/slot/port.
unit/slot/port
,
Valid unit, slot and, port number, separated by forward slashes. The
display parameters are shown below.
1-3965
VLAN ID