Filter
Top Products
252 LAG/Port Channel Commands
port-channel enable all (global)
port-channel enable all (global)
This command enables the administrative mode for all LAGs (port channels).
The
no version of this command disables all LAGs.
Syntax
[no] port-channel enable all
Mode
Global Config
Command
History
port-channel enable (interface)
This command enables the selected port channel (LAG).
The
no version of this command disables the selected LAG.
Syntax
[no] port-channel enable
Mode
Interface Config; Interface Range (Port Channel Range), which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-po-1/1-1/2)#
Usage
The [no] shutdown command provides the same functionality within both the Interface
Config and Port Channel Range modes for the selected LAG(s).
Command
History
Related
Commands
port-channel linktrap
This command enables link trap notifications for the LAG (port channel).
The
no version of this command disables link trap notifications for the LAG.
Syntax
[no] port-channel linktrap {unit/slot/port | all}
Version 2.3
Replaced
adminmode with enable.
Version 2.3
Replaced
adminmode with enable.
interface Accesses the Interface Config mode for the selected LAG.
shutdown Enables or disables the selected LAG.