Filter
Top Products
single-connection
SFTOS Command Reference for the S2410, Version 2.4.1.0 191
single-connection
Configure the client to maintain a single open connection with the TACACS server.
Syntax
[no] single-connection
Default
Use multiple connections. In other words, the client will use a separate connection for each
authentication session.
Command Mode
TACACS Configuration
show tacacs
Display configuration and status for a particular TACACS server.
Syntax
show tacacs [ip-address]
Command Mode
Privileged Exec
timeout
Specify the timeout value for a particular TACACS host.
Syntax
timeout timeout
Default
If no timeout value is specified, the global value is used.
Command Mode
TACACS Configuration
Related
Commands
tacacs-server host Identify a TACACS server.
Parameters
ip-address
IP address of the server host, in dotted decimal format.
Related
Commands
tacacs-server host Identify a TACACS server.
Parameters
timeout
Range: 1 to 30 seconds
Related
Commands
tacacs-server host Identify a TACACS server.
tacacs-server timeout Specify the authentication and encryption key for all communications
between the client and the particular TACACS server.