Filter
Top Products
clear ip dhcp conflict
SFTOS Command Reference for the S2410, Version 2.4.1.0 205
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is
used as the address parameter.
Syntax
clear ip dhcp conflict {address | *}
Default
none
Mode
Privileged Exec
client-identifier
This command specifies the unique identifier for a DHCP client. The unique identifier is a
valid notation in hexadecimal format. In some systems, such as Microsoft DHCP clients, the
client identifier is required instead of hardware addresses. The unique identifier is a
concatenation of the media type and the MAC address. For example, the Microsoft client
identifier for Ethernet address c819.2488.f177 is 01c8.1924.88f1.77 where 01 represents the
Ethernet media type. Refer to the "Address Resolution Protocol Parameters" section of RFC
1700, Assigned Numbers for a list of media type codes.
The
no version of this command deletes the client identifier.
Syntax
[no] client-identifier uniqueidentifier
Default
None
Mode
DHCP Pool Config
client-name
This command specifies the name for a DHCP client. The name is a string consisting of
standard ASCII characters.
The
no version of this command removes the client name.
Syntax
client-name name
no client-name
Default
None
Mode
DHCP Pool Config