Filter
Top Products
snmp-server
SFTOS Command Reference for the S2410, Version 2.4.1.0 97
snmp-server
This command sets the name and the physical location of the switch, and the organization
responsible for the network. The range for name, location, and contact is from 1 to 31
alphanumeric characters.
Syntax
snmp-server {sysname name | location loc | contact con}
Default
None
Mode
Global Config
snmp-server community
This command adds (and names) a new SNMP community. A community name is a name
associated with the switch and with a set of SNMP managers that manage it with a specified
privileged level. The length of name can be up to 16 case-sensitive characters.
Syntax
snmp-server community name
Default
None
Mode
Global Config
no snmp-server community
This command removes the specified community name from the SNMP community table.
Syntax
no snmp-server community name
Mode
Global Config
Note: Community names in the SNMP community table must be unique. When making
multiple entries using the same community name, the first entry is kept and processed
and all duplicate entries are ignored.