Filter
Top Products
114 System Configuration Commands
no monitor session 1
no monitor session 1
This command removes all the source ports and a destination port of the mirroring session
and restore the default value for mirroring session mode.
The
1 or session-id parameter is an integer value used to identify the session. In the current
version of the software, the
session-id parameter is always 1.
This is a stand-alone “no” command. This command does not have a “normal” form. This
command can be issued without regard for the session status (enabled or disabled).
Syntax
no monitor session 1
Default
enabled
Mode
Global Config
show forwardingdb agetime
This command displays the timeout for address aging.
Syntax
show forwardingdb agetime
Mode
Privileged Exec
Example
Figure 25 Example of show forwardingdb agetime Command Output
Command
History
show mac-address-table
This command displays the Multicast Forwarding Database (MFDB) statistics.
Syntax
show mac-address-table {gmrp | igmpsnooping | multicast | stats}
gmrp—Display GMRP entries in the MFDB table.
Force10 #show forwardingdb agetime
Address Aging Timeout:300
Force10#
Version 2.3 Modified: Removed parameters and statements relating to IVL.