Filter
Top Products
show spanning-tree summary
SFTOS Command Reference for the S2410, Version 2.4.1.0 265
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following
details are displayed on execution of the command.
Syntax
show spanning-tree summary
Mode
Privileged Exec and User Exec
Spanning Tree Adminmode—Enabled or disabled.
Spanning Tree Version—Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE
802.1D) based upon the Force Protocol Version parameter
Configuration Name—Identifier used to identify the configuration currently being used.
Configuration Revision Level—Identifier used to identify the configuration currently being used.
Configuration Digest Key—Identifier used to identify the configuration currently being used.
MST Instances—List of all multiple spanning tree instances configured on the switch
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree
instance. The
vlanid corresponds to an existing VLAN ID.
Syntax
show spanning-tree vlan vlanid
Mode
Privileged Exec and User Exec
VLAN Identifier—The VLANs associated with the selected MST instance.
Associated Instance—Identifier for the associated multiple spanning tree instance or "CST" if associated
with the common and internal spanning tree
spanning-tree
This command sets the spanning-tree operational mode to enabled.
The
no version of this command sets the spanning-tree operational mode to disabled. While
disabled, the spanning-tree configuration is retained and can be changed, but is not activated.
Syntax
[no] spanning-tree