Filter
Top Products
266 Spanning Tree (STP) Commands
spanning-tree bpdumigrationcheck
Default
disabled
Mode
Global Config
spanning-tree bpdumigrationcheck
This command enables BPDU migration check on a given interface, by using unit/slot/port,
or all interfaces, by using the
all keyword.
The
no version of this command disables BPDU migration check on all interfaces or the
designated interface.
Syntax
[no] spanning-tree bpdumigrationcheck {unit/slot/port | all}
Mode
Global Config
Command
History
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The
name is a string of at most 32 characters.
The
no version of this command resets the Configuration Identifier Name to its default.
Syntax
[no] spanning-tree configuration name name
Default
The base MAC address displayed using hexadecimal notation as specified in IEEE 802
standard.
Mode
Global Config
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level
is a number in the range of 0 to 65535.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.