Filter
Top Products
154 System Log
show logging buffered
Fields in the report include:
Logging Client Local Port—The port on the collector/relay to which syslog messages are sent
CLI Command Logging—The mode for logging CLI commands, whether enabled or disabled
Console Logging—The mode for console logging, whether enabled or disabled
Console Logging Severity Filter—The minimum event severity to display to the console
Buffered Logging—The mode for buffered logging, whether enabled or disabled
Syslog Logging—The mode for logging to configured syslog hosts, whether enabled or disabled. If set to
disabled, logging stops to all syslog hosts.
Log Messages Received—The number of messages received by the log process. This includes
messages that are dropped or ignored.
Log Messages Dropped—The number of messages that could not be processed
Log Messages Relayed
Log Messages Ignored
Event Log—Table consisting of these columns: File, Line, TaskID, Code, and “d h m s”
File—The file in which the event originated.
Line—The line number of the event.
Task Id—The task ID of the event.
Code—The event code.
“d h m s”—The time this event occurred in days, hours, minutes, and seconds since
system boot..
show logging buffered
This command displays buffered logging (the System log).
Syntax
show logging buffered
Mode
Privileged Exec
Fields in the report include:
Buffered (In-Memory) Logging—The current state of the in-memory log
Note: Event log information is retained across a switch reset.