Force10 Networks S2410s Switch User Manual


 
58 System Management Commands
interface managementethernet
interface managementethernet
This command invokes the Interface ManagementEthernet mode (uses
the(Config-if-ma)# prompt), where you can set up a management IP interface. For
details on management interfaces, see the Management chapter of the SFTOS Configuration
Guide.
Syntax
interface managementethernet
Mode
Global Config
Command
History
Usage
Information
This command provides access to the following network configuration command groups:
Related
Commands
ip address (management)
This command configures the IP address of the management interface.
Syntax
ip address ipaddr subnetmask
Version 2.3 Introduced
Table 4 Interface ManagementEthernet Mode Command Families
ip Configure network parameters of the switch.
mac-address Configure MAC Address.
mac-type Select the locally administered or burnedin MAC address.
vlan Configure the Management VLAN ID of the switch.
protocol Select DHCP, BootP, or None as the network config protocol
ip address (management) Configures the IP address of the management interface.
mac-address Configure the MAC address of the management interface.
mac-type Configure the MAC type of the management interface.
management route default Set the IP gateway of the switch
protocol Set the network protocol of the management interface.
show interface Display a summary of statistics for a specific port, including the
management port, or a count of all CPU traffic based upon the
argument.
ip http server enable Enable access to the switch through the Web User Interface
(Web UI) of SFTOS.
vlan participation (management) Set the VLAN ID of the management interface.