Filter
Top Products
92 System Management Commands
serial timeout
The no serial baudrate command sets the communication rate of the terminal interface to
the 9600 default.
Default
9600
Mode
Line Config
serial timeout
This command specifies the maximum connect time (in minutes) without console activity.
Syntax
serial timeout 0-160
A value of 0 means no console timeout. The range is 0 to 160 minutes.
The
no serial timeout command sets the maximum connect time (in minutes) without
console activity to the 5-minute default.
Default
5
Mode
Line Config
show serial
This command displays serial communication settings for the switch.
Syntax
show serial
Mode
Privileged Exec and User Exec
Example
(Force10 S50) #show serial
Serial Port Login Timeout (minutes)............ 20
Baud Rate (bps)................................ 9600
Character Size (bits).......................... 8
Flow Control................................... Disable
Stop Bits...................................... 1
Parity......................................... none