Filter
Top Products
SFTOS Command Reference for the S2410, Version 2.4.1.0 45
The following command-mode tree diagram provides an overview of the names of the modes
and how they relate to each other. The User Exec mode at the top of the tree is the mode you
enter when you access the CLI.
Mode-based Topology
As detailed above, the CLI is built on a mode concept, where related commands are grouped
together within modes that you access with particular mode-access commands. The
mode-access commands are listed in Table 3 on page 47. Access to the modes is depicted in a
tree format in Figure 5.
Note: Except for the Interface Range mode or its child modes—Ethernet Range mode,
Port Channel mode, and VLAN Range mode—and the TACACS Config mode, the
diagram shows modes that are in the Layer 2 Package of SFTOS or the Layer 3
Package of SFTOS. Those in the Layer 3 Package include the various “Router”
modes.