Filter
Top Products
interface range
SFTOS Command Reference for the S2410, Version 2.4.1.0 109
Defaults
This command has no default behavior or values.
Mode
Global Config
Command
History
Usage
Information
When creating an interface range, interfaces appear in the order they are entered; they are not
sorted. The command verifies that interfaces are present (physical) or configured (logical).
Important things to remember:
• Bulk configuration is created if at least one interface is valid.
• Automatically excludes non-existing interfaces from the bulk configuration and generates
a warning message (Figure 22).
• The resulting interface range prompt includes interface types with slot/port information
for valid interfaces, for example: (conf-if-range-et-1/0/10-1/0/11)#. The
prompt allows for a maximum of 32 characters. If the bulk configuration exceeds 32
characters, it is represented by an ellipsis ( ... ).
• If the interface range prompt has multiple port ranges, the smaller port range is excluded
from the prompt (Figure 22).
• If overlapping port ranges are specified, the port range is extended to the smallest start
port and the biggest end port (Figure 23).
Executing the
interface range command puts you in the Interface Range mode, more
specifically, in one of three versions of it—Ethernet Range, Port Channel Range, or VLAN
Range. Here, you can execute commands that modify the selected set of interfaces. These
commands have the same effect as they do when they are used within the Interface VLAN or
Interface Config modes (see interface on page 108, LAG/Port Channel Commands on
page 249, and interface vlan on page 123).
The command families available from the Ethernet Range prompt are displayed in the
following CLI example (Figure 21 on page 110). The commands available from the VLAN
Parameters
ethernet
range,range
,...
Enter the keyword ethernet and one or more ports separated by hyphens
and commas in this form:
ethernet unit/slot/port - port,unit/slot/port
-
port.
Spaces are not allowed around commas or hyphens.
Example: ethernet 1/0/1-1/0/10,1/0/40-1/0/45
port-channel
range,range,...
Enter the keyword port-channel and one or more port channel numbers
separated by commas or grouped in a range in this form:
port-channel 0/1/1-0/1/4
Spaces are not allowed around commas or hyphens.
You can enter up to six comma-separated ranges.
vlan
range,range,
...
Enter the keyword vlan and one or more VLAN numbers, from 1 to 3965,
separated by commas or grouped in a range in this form:
vlan 10,33-50
Spaces are not allowed around commas or hyphens.
You can enter up to six comma-separated ranges.
Version 2.3 Introduced