Filter
Top Products
ip ssh protocol
SFTOS Command Reference for the S2410, Version 2.4.1.0 193
ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1
(1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Syntax
ip ssh protocol [1] [2]
Default
1 and 2
Mode
Global Config
Command
History
ip ssh server enable
Enable SSH.
The
no version of this command disables SSH..
Syntax
ip ssh server enable
no ip ssh server enable
Default
disabled
Mode
Global Config
Command
History
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Note: This command requires keys/certificates to be generated offline before the
service will start.
See s50-secure-management.pdf at (log-in required):
https://www.force10networks.com/csportal20/KnowledgeBase/Documentation.aspx
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Related
Commands
ip telnet server enable Enable/disable Telnet services.
ip http secure-server
enable
Enable/disable HTTPS services.