Filter
Top Products
set garp timer leaveall
SFTOS Command Reference for the S2410, Version 2.4.1.0 227
set garp timer leaveall
This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU
indicates that all registrations will be unregistered. Participants would need to rejoin in order
to maintain registration. The value applies per port and per GARP participation. The time
may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
Syntax
set garp timer leaveall 200-6000
Use no set garp timer leaveall to set how frequently Leave All PDUs are generated per port
to 1000 centiseconds (10 seconds).
Default
1000
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
show garp
This command displays Generic Attributes Registration Protocol (GARP) information.
Syntax
show garp
Mode
Privileged Exec and User Exec
GMRP Admin Mode—This displays the administrative mode of GARP Multicast Registration Protocol
(GMRP) for the system.
GVRP Admin Mode—This displays the administrative mode of GARP VLAN Registration Protocol
(GVRP) for the system
Note: This command has an effect only when GVRP is enabled.
Version 2.3 Interface Range mode added
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode