Filter
Top Products
286 Quality of Service (QoS) Commands
show classofservice dot1pmapping
show classofservice dot1pmapping
This command displays the current 802.1p priority mapping to internal traffic classes for all
or specific interfaces.
Syntax
show classofservice dot1pmapping [unit/slot/port]
Mode
Privileged Exec and User Exec
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports
presently plugged into the device. The range for the priority is 0-6. Any subsequent per port
configuration will override this configuration setting.
Syntax
vlan port priority all priority
Mode
Global Config
vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a
specific interface. The range for the priority is 0-6.
Syntax
vlan priority priority
Default
0
Mode
Interface Config