Filter
Top Products
spanning-tree max-age
SFTOS Command Reference for the S2410, Version 2.4.1.0 269
spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to "2 times (Bridge Forward Delay - 1)".
The
no version of this command sets the Bridge Max Age parameter for the common and
internal spanning tree to the default value, in other words, 20.
Syntax
spanning-tree max-age 6-40
no spanning-tree max-age
Default
20
Mode
Global Config
spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and
internal spanning tree. The max-hops value is in a range of 1 to 127.
The
no version of this command sets the Bridge Max Hops parameter for the common and
internal spanning tree to the default value.
Syntax
spanning-tree max-hops 1-127
[no] spanning-tree max-hops
Default
20
Mode
Global Config
spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning
tree instance or in the common and internal spanning tree. If the
mstid parameter corresponds
to an existing multiple spanning tree instance, then the configurations are done for that
multiple spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the
mstid, then the configurations are performed for the common and internal spanning tree
instance.