Filter
Top Products
dot1x re-authenticate
SFTOS Command Reference for the S2410, Version 2.4.1.0 173
Force-unauthorized—The authenticator PAE unconditionally sets the controlled port to
unauthorized.
Force-authorized—The authenticator PAE unconditionally sets the controlled port to
authorized.
Auto—The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Syntax
dot1x port-control all {force-unauthorized | force-authorized | auto}
no dot1x port-control all sets the authentication mode to be used on all ports to auto.
Default
auto
Mode
Global Config
dot1x re-authenticate
This command begins the re-authentication sequence on the specified port. This command is
only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto'
an error will be returned.
Syntax
dot1x re-authenticate unit/slot/port
Mode
Global Config
Command
History
dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
The
no version of this command disables re-authentication of the supplicant for the specified
port.
Syntax
dot1x re-authentication
Default
disabled
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.