Filter
Top Products
mtu
SFTOS Command Reference for the S2410, Version 2.4.1.0 61
Example
Figure 8 Example of Configuring Management Address
Related
Commands
mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and
LAG (port channel) interfaces.
Syntax
[no] mtu 1518-10240
For the standard implementation, the range of the MTU size is a valid integer between
1518-
10240.
The
no mtu command sets the default maximum transmission unit (MTU) size (in bytes) for
the interface.
Default
1518
Mode
Interface Config
(s50-1) (Config)#management route default 10.10.1.254
(s50-1) (Config)#interface managementethernet
(Config-if-ma)#ip address 10.10.1.251 255.255.255.0
(Config-if-ma)#exit
(s50-1) (Config)#ip http server enable
(s50-1) (Config)#exit
(s50-1) #
(s50-1) #show interface managementethernet
IP Address..................................... 10.10.1.151
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 10.10.1.254
Burned In MAC Address.......................... 00:01:E8:D5:A0:39
Locally Administered MAC Address............... 00:00:00:00:00:00
MAC Address Type............................... Burned In
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1
Web Mode....................................... Enable
Java Mode...................................... Disable
interface managementethernet Invokes the (Config-if-ma)# prompt, where you can set up a
management IP interface (the ip address command; see next).
ip address (management) Configures the IP address of the management interface.
show interface Displays a summary of statistics for a specific port, including the
management port, or a count of all CPU traffic based upon the
argument.
Note: 10-Gigabit ports use a chipset that does not automatically allow for the
length of a tag. For 10-Gigabit ports, the default setting of 1518 means 1518
untagged or tagged. The maximum is 10240 bytes.