Filter
Top Products
mac access-list extended rename
SFTOS Command Reference for the S2410, Version 2.4.1.0 291
mac access-list extended rename
This command changes the name of an existing MAC ACL. The name parameter is the name
of an existing MAC ACL. The
newname parameter is a case-sensitive alphanumeric string
from 1 to 31 characters uniquely identifying the MAC access list.
This command fails if a MAC ACL by the name
newname already exists.
Syntax
mac access-list extended rename name newname
Parameters
Mode
Global Config
Related
Commands
mac access-group (port
channel)
In the Interface Port Channel Config mode, attaches a MAC ACL to
the selected port channel
mac access-group Attaches a specific MAC Access Control List (ACL) identified by
name to an interface in the ingress direction
mac access-list extended
rename
Changes the name of an existing MAC ACL.
show mac access-lists
Displays the rules defined for the MAC access list specified by
name.
name The ACL name assigned during the creation of the ACL by using the mac
access-list extended
command
newname
Case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the MAC access list. The string may include alphabetic,
numeric, dash, dot or underscore characters only. The string must start
with a letter.
{deny|permit}
Creates a new rule for the MAC access list selected by the
mac
access-list extended
command.
interface range Defines an interface range and accesses the Interface Range mode
mac access-group (port
channel)
In the Interface Port Channel Config mode, attaches a MAC ACL to
the selected port channel
mac access-group Attaches a specific MAC Access Control List (ACL) identified by
name to an interface in the ingress direction
mac access-list extended Creates a MAC Access Control List (ACL)
show mac access-lists
Displays the rules defined for the MAC access list specified by
name