Filter
Top Products
240 IGMP Snooping Commands
igmp mrouter (interface)
igmp mrouter (interface)
This command configures the VLAN ID (vlanId) that has the multicast router mode enabled.
Syntax
[no] igmp mrouter vlanId
The no version of this command disables multicast router mode for a particular VLAN ID
(
vlanId).
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
igmp mrouter interface enable
This command configures a selected interface as a multicast router interface. When
configured as a multicast router interface, the interface is treated as a multicast router
interface in all VLANs.
Syntax
[no] igmp mrouter interface enable
The no version of this command disables the status of the interface as a statically configured
multicast router interface.
Default
disable
Mode
Interface Config
Command
History
Related
Commands
igmp enable (interface) Enables IGMP Snooping on a selected interface.
set igmp mcrtexpiretime
(global)
sets the Multicast router present expiration time for all routers.
interface range Defines an interface range and accesses the Interface Range mode
show igmpsnooping Displays IGMP Snooping status information.
show igmpsnooping Displays IGMP Snooping status information.
Version 2.3
Modified: Revised from set igmp mrouter. Added Interface Range mode.
Related
Commands
igmp enable (interface) Enables IGMP Snooping on a selected interface.
interface range Defines an interface range and accesses the Interface Range mode
interface Identifies an interface and enters the Interface Config mode.
Version 2.3
Revised from set igmp mrouter interface.