Force10 Networks S2410s Switch User Manual


 
mac-address
SFTOS Command Reference for the S2410, Version 2.4.1.0 59
The value for ipaddr is the IP Address of the management interface. This is the IP address
that you would enter in your Web browser to access the SFTOS Web User Interface.
The value for
subnetmask is a 4-digit dotted-decimal number which represents the subnet
mask of the interface.
Enter
no ip address to remove the IP Address and subnet mask.
Mode
(Config-if-ma)# prompt within the Global Config mode
Command
History
Related
Commands
mac-address
Configure the MAC address to be used for the management VLAN.
Syntax
mac-address mac-address
Default
None
Mode
Interface ManagementEthernet
Command
History
Related
Commands
mac-type
Configure the MAC address to be used for the management VLAN.
Syntax
mac-type {local | burnedin}
Version 2.3 Introduced: Replaces the network parms command for the IP address and
subnet mask components of the management address.
management route default Sets the IP gateway of the switch.
interface managementethernet Invokes the (Config-if-ma)# prompt.
show interface Displays a summary of statistics for a specific port,
including the management port, or a count of all CPU
traffic based upon the argument.
Version 2.3
Introduced. Replaces the network mac-address
command.
management route default Sets the IP gateway of the switch.
interface managementethernet Invokes the Interface ManagementEthernet mode, the
(Config-if-ma)# prompt.