Filter
Top Products
136 System Configuration Commands
vlan protocol group
vlan protocol group
This command adds a protocol-based VLAN group to the system. The groupname is a
character string of 1 to 16 characters. When it is created, the protocol group will be assigned
a unique number that will be used to identify the group in subsequent commands.
Syntax
vlan protocol group groupname
Mode
Global Config
vlan protocol group add protocol
This command adds the protocol to the protocol-based VLAN identified by groupid. A
group may have more than one protocol associated with it. Each interface and protocol
combination can only be associated with one group. If adding a protocol to a group causes
any conflicts with interfaces currently associated with the group, this command will fail and
the protocol will not be added to the group. The possible values for protocol are ip, arp, and
ipx.
The
no version of this command removes the protocol from this protocol-based VLAN
group that is identified by this
groupid. The possible values for protocol are ip, arp, and ipx.
Syntax
[no] vlan protocol group add protocol groupid protocol
Default
None
Mode
Global Config
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this groupid.
Syntax
vlan protocol group remove groupid
Mode
Global Config