Filter
Top Products
254 LAG/Port Channel Commands
port lacpmode
Mode
Global Config
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port. The no version
of this command disables Link Aggregation Control Protocol (LACP) on a port.
Syntax
[no] port lacpmode
Default
disabled
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
Related
Commands
port lacpmode enable all
This command enables Link Aggregation Control Protocol (LACP) on all ports. The no
version of this command disables Link Aggregation Control Protocol (LACP) on all ports.
Syntax
[no] port lacpmode enable all
Mode
Global Config
Command
History
Related
Commands
port lacptimeout (global)
This command sets the Link Aggregation Control Protocol (LACP) timeout on all ports.
Version 2.4
Deprecated.
Use [no] port-channel staticcapability.
Version 2.3 Added Interface VLAN and Interface Range modes.
port-channel staticcapability Enables static LAGs (port channels) on the device.
Version 2.4
Deprecated.
Use [no] port-channel staticcapability.
Version 2.3
Revised from [
no] port lacpmode all.
port-channel staticcapability Enables static LAGs (port channels) on the device.