Filter
Top Products
SFTOS Command Reference for the S2410, Version 2.4.1.0 21
This guide describes configuration commands for SFTOS 2.4 software, which is dedicated to
the S2410 models of the S-Series line of switches. The commands can be accessed from the
SFTOS Command Line Interface (CLI), accessed through the console port or through a
Telnet connection, and from the Node Manager component of Force10 Networks
®
Management System (FTMS).
This chapter covers the following topics:
• Objectives
• Audience on page 22
• How to Use this Guide on page 22
• Related Documents and Sources of Additional Information on page 23
• Products and Services Liability on page 23
• Contact Information on page 23
• Documentation Feedback on page 24
• The iSupport Website on page 24
Objectives
This document is intended as a reference guide for users of the SFTOS CLI commands —
primarily for syntax information for constructing command input at the CLI. Also, in some
cases, “screenshot” examples are provided.
Commands that generate reports are called “show commands”, because they all begin with
the keyword “
show”. The syntax statements for those commands in this guide contain a
description of the fields in their reports, and, in some cases, with examples.
This document includes information on the protocols and features found in SFTOS.
Background on networking protocols is included primarily to describe the capabilities of
SFTOS. For more complete information on protocols, refer to other documentation and IETF
RFCs.
About This Guide
Note: Please note that BGP and bandwidth allocation are not supported in this
release, but may appear in the command output examples in this document.