Filter
Top Products
clear vlan
SFTOS Command Reference for the S2410, Version 2.4.1.0 121
• participation (VLAN) on page 126
• priority (VLAN) on page 126
• protocol group on page 127
• protocol vlan group on page 127
• protocol vlan group all on page 128
• pvid (VLAN) on page 128
• show vlan on page 129
• show vlan port on page 130
• tagged on page 131
• untagged on page 132
• vlan on page 132
• vlan acceptframe on page 133
• vlan database on page 133
• vlan ingressfilter on page 133
• vlan participation (interface) on page 133
• vlan participation all on page 134
• vlan port acceptframe on page 134
• vlan port ingressfilter all on page 134
• vlan port pvid all on page 134
• vlan port tagging all on page 135
• vlan protocol group on page 136
• vlan protocol group add protocol on page 136
• vlan protocol group remove on page 136
• vlan pvid on page 137
• vlan tagging on page 137
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Syntax
clear vlan
Default
disabled
Note: For information on commands related to the management VLAN, see General
System Management and Information Commands on page 55 (most specifically,
interface managementethernet on page 58) in the Management chapter.
For general instructions on configuring the management VLAN, see the Management
chapter in the SFTOS Configuration Guide.
For other VLAN information in the SFTOS Configuration Guide, see the Creating
VLANS section of the Getting Started chapter, the chapters on the Web UI, STP, IEEE
802.1Q VLANs, VLAN-Stack commands, GARP and GVRP, IGMP Snooping.