Filter
Top Products
dot1x user
SFTOS Command Reference for the S2410, Version 2.4.1.0 175
tx-period—Sets the value, in seconds, of the timer used by the authenticator state machine on this port
to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The quiet-period
must be a value in the range 1 - 65535.
supp-timeout—Sets the value, in seconds, of the timer used by the authenticator state machine on this
port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.
server-timeout—Sets the value, in seconds, of the timer used by the authenticator state machine on this
port to timeout the authentication server. The supp-timeout must be a value in the range 1 - 65535.
Default
reauth-period: 3600 seconds
quiet-period: 60 seconds
tx-period: 30 seconds
supp-timeout: 30 seconds
server-timeout: 30 seconds
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
dot1x user
This command adds the specified user to the list of users with access to the specified port or
all ports. The
user parameter must be a configured user.
The
no version of this command removes the user from the list of users with access to the
specified port or all ports.
Syntax
dot1x user user {unit/slot/port | all}
Mode
Global Config
show authentication
This command displays the ordered authentication methods for all authentication login lists.
Version 2.3 Interface Range mode added
Related
Commands
show dot1x Display data on the dot1x configuration, for a specified port or all ports,
Related
Commands
show dot1x users Display 802.1x port security user information for locally configured users.