Filter
Top Products
show port
SFTOS Command Reference for the S2410, Version 2.4.1.0 117
Syntax
show monitor session 1
Mode
Privileged Exec
Example
Figure 27 Command Example: show monitor session 1
Field
Descriptions
Session ID—In all released versions of SFTOS, the session is always 1.
Admin Mode—Indicates whether the Port Mirroring feature is enabled or disabled. The possible values
are Enable and Disable.
Probe Port
unit/slot/port—The unit/slot/port configured as the probe port (destination port for
mirroring). If this value has not been configured, 'Not Configured' will be displayed.
Mirrored Port
unit/slot/port—The unit/slot/port configured as the monitored port (source port,
mirrored port). If this value has not been configured, 'Not Configured' will be displayed.
show port
This command displays port information for a selected port or for all ports. The Port
Summary panel of the Web User Interface displays the same information.
Syntax
show port {unit/slot/port | all}
Mode
Privileged Exec
Command
History
Force10 #show monitor session 1
Session ID Admin Mode Probe Port Mirrored Port
---------- ---------- ---------- -------------
1 Enable 2/0/26 1/0/1
Related
Commands
monitor session Adds a mirrored port (source port) or probe port (destination port) to
a session identified with the session ID of 1.
monitor session 1 mode Sets the monitor session (port monitoring) mode to enabled.
Version 2.3 Modified: Revised to include VLAN interface IDs in the Interface column of the
report.