Filter
Top Products
258 LAG/Port Channel Commands
shutdown
shutdown
This command disables the selected LAG (port channel).
The
no version of this command enables the selected LAG.
Syntax
[no] shutdown
Default
disabled
Mode
Interface Config; Interface Range (Port Channel Range), which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-po-1/1-1/2)#.
Related
Commands
interface Defines an interface range and accesses the Interface Range mode
interface range Identifies an interface and enters the Interface Config mode.
port-channel enable all (global) Enables [disables] all LAGs.
shutdown (Interface) Enables [disables] the selected port.