Filter
Top Products
vlan participation (management)
SFTOS Command Reference for the S2410, Version 2.4.1.0 87
Related
Commands
vlan participation (management)
This command assigns the management VLAN of the switch.
Syntax
[no] vlan participation vlan_id
The value for vlan_id is the VLAN that you want to use for the management interface (By
default, VLAN 1 is used.)
Mode
Interface ManagementEthernet. Uses the (Config-if-ma)# prompt, accessed by interface
managementethernet.
Default
VLAN 1 (default management VLAN; all enabled ports are on VLAN 1 by default, so all
ports are capable, by default, of being management ports.)
Command
History
Related
Commands
Telnet Commands
This section describes the following SFTOS Telnet commands:
• ip telnet maxsessions on page 88
• ip telnet timeout on page 88
• session-limit on page 89
• session-timeout on page 89
• show telnet on page 90
• telnet on page 90
show hardware Inventory information for the switch
show logging Trap log maintained by the switch, and event log, containing error
messages from the system
show port
Port information
show running-config Updated configuration maintained by the switch.
show version Details of the software/hardware present on the system
Version 2.3 Introduced: Replaces the network mgmt_vlan command.
management route default Sets the IP gateway of the switch.
interface managementethernet Invokes the Interface ManagementEthernet mode, the
(Config-if-ma)# prompt.
show interface Displays a summary of statistics for a specific port,
including the management port, or a count of all CPU
traffic based upon the argument.