Filter
Top Products
198 Security Commands
show ip http
show ip http
This command displays the HTTP settings for the switch.
Syntax
show ip http
Mode
Privileged Exec
The report fields are:
HTTP Mode (Unsecure) — This field indicates whether basic HTTP is enabled or
disabled on the switch.
HTTP Mode (Secure) — This field indicates whether the administrative mode of secure
HTTP (HTTPS) is enabled or disabled on the switch.
Java Mode — This field indicates whether Java mode is enabled or disabled on the
switch.
Secure Port—This field specifies the port configured for SSLT.
Secure Protocol Level—The protocol level may have the values of SSL3, TSL1, or both
SSL3 and TSL1.
Example
Figure 45 Example of show ip http Command Output
Force10 #show ip http
Java Mode: Disabled
HTTP Mode (Unsecure): Disabled
HTTP Mode (Secure): Disabled
Secure Port: 443
Secure Protocol Level(s): TLS1 SSL3
Force10#