Filter
Top Products
show dot1q-tunnel
SFTOS Command Reference for the S2410, Version 2.4.1.0 223
show dot1q-tunnel
This command displays whether an interface is enabled for Double VLAN Tunneling, along
with the system-configured etherType and detailed information about Double VLAN
Tunneling for the specified interface, or a list of interfaces and their tunneling status. This
command performs the same function as
show dvlan-tunnel.
Syntax
show dot1q-tunnel [interface {unit/slot/port | all}]
Mode
Privileged Exec and User Exec
Web User
Interface
Double VLAN Tunneling Summary (This S50 Web Interface panel has similar functionality.
Access it in the node tree through System >> Port >> Double VLAN Tunneling.)
Usage
Information
The following screen capture shows the use of the three ways of using the command—
without the
interface keyword and with the keyword followed by a port number or all.
Example
Related
Commands
show dot1q-tunnel Displays information about Double VLAN Tunneling for a specified
interface or for all interfaces.
show dvlan-tunnel same as above
Parameters
interface {unit/slot/
port
| all}]
Enter the interface keyword followed by either a specific address in
the form of
unit/slot/port or enter the word all.
Unit/Slot/Port—Valid unit, slot and port number separated by forward
slashes.
(S2410) >show dot1q-tunnel ?
<cr> Press Enter to execute the command.
interface Enter interface.
(S2410) >show dot1q-tunnel
Interfaces Enabled for DVLAN Tunneling......... None
(S50-8) >show dot1q-tunnel interface 1/0/1
Interface Mode EtherType
--------- ------- --------------
1/0/1 Disable 802.1Q
(S50-8) >show dot1q-tunnel interface all
Interface Mode EtherType
--------- ------- --------------
1/0/1 Disable 802.1Q
1/0/2 Disable 802.1Q
1/0/3 Disable 802.1Q
1/0/4 Disable 802.1Q
1/0/5 Disable 802.1Q
1/0/6 Disable 802.1Q
1/0/7 Disable 802.1Q
1/0/8 Disable 802.1Q
1/0/9 Disable 802.1Q
1/0/10 Disable 802.1Q
![truncated]!