Filter
Top Products
246 IGMP Snooping Commands
show igmpsnooping fast-leave
Max Response Time—This displays the amount of time the switch will wait after sending a query on an
interface because it did not receive a report for a particular group on that interface. This value may be
configured.
Multicast Router Present Expiration Time—If a query is not received on an interface within this amount
of time, the interface is removed from the list of interfaces with multicast routers attached. This value
may be configured.
When the optional argument 1-3965 is used, the response is the same as for unit/slot/port,
except that one more report field is added:
Vlan ID—This echoes the number of the VLAN specified in the parameter.
show igmpsnooping fast-leave
Command
History
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Syntax
show igmpsnooping mrouter interface {unit/slot/port | vlan 1-3965}
Mode
Privileged Exec
Report Fields unit/slot/port—The port on which multicast router information is being displayed.
Multicast Router Attached—This indicates whether or not multicast router is statically enabled on the
interface.
VLAN ID—The list of VLANs of which the interface is a member.
Version 2.3 Deprecated: Use show igmpsnooping to display whether or not IGMP Snooping is
enabled on the designated interface.
Parameters
unit/slot/port
Display ports on which Multicast Routers are detected. Enter
interface in
unit/slot/port format.
vlan 1-3965
Display VLANS for the specified interface on which Multicast Routers
are detected.