Force10 Networks S2410s Switch User Manual


 
SFTOS Command Reference for the S2410, Version 2.4.1.0 105
This chapter provides a detailed explanation of the system configuration commands in the
following major sections:
System Configuration Commands
Virtual LAN (VLAN) Commands on page 120
System Utility Commands on page 138
Configuration Scripting on page 146
System Configuration Commands
This section describes the following system configuration commands:
bridge aging-time on page 106
configure on page 106
enable on page 107
interface on page 108
interface range on page 108
monitor session on page 112
monitor session 1 mode on page 113
no monitor on page 113
no monitor session 1 on page 114
show forwardingdb agetime on page 114
show mac-address-table on page 114
Chapter 6
System Configuration
Commands
Note: For Link Aggregation Group (LAG) (also called port channel) commands, see
Chapter 15, LAG/Port Channel Commands, on page 249.
User access commands are in Chapter 8, User Account Commands, on page 157. A
related chapter is
Security Commands on page 163.
Broadcast storm control commands are in the Broadcast Storm Control Commands on
page 199, in Chapter 8, User Account Commands, on page 157.