Filter
Top Products
vlan acceptframe
SFTOS Command Reference for the S2410, Version 2.4.1.0 133
vlan acceptframe
This command sets the frame acceptance mode per interface.
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
vlan database
Command
History
vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted
and forwarded to ports that are members of that VLAN.
Command
History
vlan participation (interface)
This command configures the degree of participation for a specific interface in a VLAN. The
ID is a valid VLAN identification number, and the interface is a valid interface number.
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3
Deprecated
Related
Commands
tagged Adds the designated interface to the selected VLAN as a tagged interface.
untagged Adds the designated interface to the selected VLAN as an untagged interface.
Version 2.3 Modified: Replaced by interface vlan.
Version 2.3 Deprecated
Related
Commands
tagged Adds the designated interface to the selected VLAN as a tagged interface.
untagged Adds the designated interface to the selected VLAN as an untagged
interface.