Filter
Top Products
port-channel name
SFTOS Command Reference for the S2410, Version 2.4.1.0 253
Parameters
Default
enabled
Mode
Global Config
port-channel name
This command renames a LAG (port channel) or all LAGs.
Syntax
port-channel name {unit/slot/port | all} name
Parameters
Mode
Global Config
Related
Commands
port-channel staticcapability
Enable/Disable static capability for all LAGs (port channels).
Syntax
[no] port-channel staticcapability
Default
disabled
unit/slot/
port
Enter the logical ID of a configured LAG (slot/port format, such as 1/4).
all Enter all to select all configured LAGs.
unit/slot/
port
Enter the logical ID of a configured LAG (slot/port format, such as 1/4).
all Enter all to select all configured LAGs.
name
Enter an alphanumeric string up to 15 characters. This name replaces the
user-entered name that was associated with the selected LAG when it was created.
Or, if all was entered instead of the LAG ID, the entered name replaces the names
of all
configured LAGs.
addport Add a port to a LAG. Ports added to a LAG must be physical ports, not other
LAGs.
port-channel Create or delete a LAG.
show port-channel Display the configured LAG names and their IDs. The interface number is
specified in logical slot/port format, which displays one (1) as the slot number;
the port number is a sequential integer, based on existing LAG numbers when
the new LAG is created.
Before adding ports to the newly defined LAG, use this command to determine
the logical ID to identify the LAG when associating a port with it.