Filter
Top Products
82 System Management Commands
show serviceport
Example
Figure 16 Using the show running-config command
Note:
Usage
Information
Starting with Release 2.3, show running-config startup-config provides the user the
opportunity to capture the running-config data to the startup-config file as a text file. If a
startup-config file is already present, the system will prompt the user to overwrite it.
Related
Commands
show serviceport
This command displays information about the management address of the Ethernet
Management port.
Syntax
show serviceport
Mode
Privileged Exec
Command
History
(S50-TAC-5) #show running-config all
!Current Configuration:
!
hostname "S50-TAC-5"
no set gmrp adminmode
no set gvrp adminmode
telnetcon timeout 5
telnetcon maxsessions 5
ip telnet server enable
network protocol none
network parms 172.17.1.222 255.255.255.0 172.17.1.254
network mac-type burnedin
network mgmt_vlan 1
no network javamode
vlan database
set igmp groupmembership-interval 1 260
set igmp maxresponse 1 10
set igmp mcrtrexpiretime 1 0
Note: This sample of the output is just a small part of the many thousands of
lines generated when the all option is used.
script apply Applies the commands in the designated script to the switch.
script delete Deletes a specified script.
script list Lists all scripts present on the switch as well as the total number of
files present.
script show Displays the contents of a designated script file.
script validate Validates a designated configuration script file.
Version 2.4.1 Introduced