Filter
Top Products
Service Tests and Utilities
4-9
HP DesignJet 5000 Series Printers Service Manual
If your Firmware does not support Service Tests, the following
message is displayed. You should press Enter to exit. If you need
the Service Tests, download the latest Firmware and repeat the
whole procedure to enter the Service Tests menu.
NOTE If the Printer is not used for 3 minutes, the Printer exits the
Service Tests Menu and you must repeat the above steps to enter
Service Tests again.
NOTE In some cases a quick press of a button may not be recognized by
the Printer. When pressing a button, be sure to press it
deliberately and all the way to the bottom of its travel.
NOTE If the Printer hangs up during an operation, switch the Printer
OFF and restart from step 1.
3. Service Tests
Top
Enter
Back
↑
↓
Press Enter to continue
Error!!
Svs Test not available.
Press Enter
Upgrade Firmware rev.